|
|
(No se muestra una edición intermedia del mismo usuario) |
Línea 1: |
Línea 1: |
| ==PROBLEMA 1.4==
| | Se inicia ''luz wiki'' para fomentar la colaboración académica delocalizada. |
| '''The system shown at the rest in fig. 1.1(a) could be set into vibration by giving the mass a sudden momentum impulse to the left: by tapping it with a hammer, for example. If the magnitude of the impulse is $p_1$ and it is given at time$t=0$, find (a) the amplitude and (b) the phase constant of the ensuing motion.''' | |
|
| |
|
| Inicialmente tenemos que la posición en un tiempo $t=0$ es $x(0)=0$.
| | [[Imagen:Colibri-duo.jpg|500px]] |
|
| |
|
| Para resolver este problema, utilizaremos la solución dada por el autor del libro $x(t)=A\cos (wt+\varphi)$ para la ecuación
| | '''los artículos de [[Especial:Allpages|todas las contribuciones]] ''' |
| <center>$m \frac{d^2x}{dt^2}=-kx+p_1$</center>
| | '''se encuentran en esta [[Especial:Allpages|liga]]''' |
|
| |
|
| Para poder encontrar la fase($\varphi$), sustituiremos $t=0$ en la solución planteada.
| | Por favor, lee [https://www.mediawiki.org/wiki/Localisation documentation on customizing the interface] y [http://meta.wikimedia.org/wiki/MediaWiki_User%27s_Guide User's Guide] para conocer su configuración y uso. |
|
| |
|
| <center>$x(0)=A\cos(w(0)+\varphi)=0$</center> | | <center>fraternalmente: manuel fernández guasti</center> |
| <center>$A\cos(\varphi)=0$</center>
| |
| <center>$\cos(\varphi)=0$</center>
| |
| <center>$\varphi=\arccos(0)$</center>
| |
| <center>$\varphi=\pi/2$</center>
| |
| Teniendo ahora como solución $x(t)=A\cos(wt+\frac{\pi}{2})$ podremos hallar la Amplitud.
| |
| | |
| Sabemos que la derivada de la posición respecto del tiempo es la velocidad, en este caso $v(t)=-Aw\sin(wt+\frac{\pi}{2})$, donde al aplicarle la condición inicial $t=0$ obtenemos
| |
| <center>$v(0)=-Aw=v_o$</center>
| |
| | |
| Definimos $p_1$ como
| |
| <center>$p_1=mv_o$</center>
| |
| | |
| Sustituyendo $v_o$ en la última ecuación
| |
| <center>$p_1=Amw$</center>
| |
| <center>$A=\frac{p_1}{mw}$</center>
| |
| ==
| |
| == Problema 2.7 capitulo 2 del libro de vibrations and waves in physics, Iain G. Main, third edition ==
| |
| | |
| '''La Figura 2.8 muestra una arreglo que podría usarse para configurar un circuito $LC$ en oscilación. El condensador se carga primero a una tensión $V_{1}$ por medio de la batería. En el momento $t = 0$, el interruptor se activa para conectar el condensador cargado a través de la bobina. Derive (a) la amplitud y (b) la constante de fase de la oscilación resultante.'''
| |
| | |
| Solución:
| |
| | |
| Para resolver el circuito de la Figura 2.8, usamos la segunda ley de Kirchhoff
| |
| | |
| <center><math> \sum_{k=1}^n V_k = V_1 + V_2 + V_3\dots + V_n = 0</math></center>
| |
| | |
| Como solamente tenemos dos caídas de tensiones debidas al capacitador y la inductancia, obtenemos
| |
| | |
| <center><math> V_{C}+ V_{L} = 0</math></center>
| |
| | |
| Donde $V_{C} =\frac{\psi}{C}$ y $V_{L}= L\frac{di}{dt}$, como $i=\frac{d \psi}{dt}$ entonces nos queda que $V_{L}= L\frac{d^2 \psi}{dt^2}=L \ddot{\psi}$.
| |
| | |
| Sustituimos, y obtenemos
| |
| | |
| <center><math> L\ddot{\psi}+\frac{\psi}{C}= 0 \rightarrow \ddot{\psi}+\frac{\psi}{LC}= 0 </math></center>
| |
| | |
| Definamos la pulsación natural del sistema como $\omega^2_{0} = \frac{1}{LC}$. Obtenemos
| |
| | |
| <center><math>\ddot{\psi}+\omega^2_{0}\psi = 0</math></center>
| |
| | |
| Cuya ecuación característica es $r^2+\omega^2_{0}=0$, y la solución de la ecuación diferencial es de la forma $\psi(t)=C_{1}e^{r_{1}t}+C_{2}e^{r_{2}t}$.
| |
| | |
| Las raíces de la ecuación característica son: $r_{1}=\omega_{0}i$ y $r_{2}=-\omega_{0}i$
| |
| | |
| Y la solución general de la ecuación homogénea es
| |
| | |
| <center><math>\psi(t)=C_{1}e^{\omega_{0} i t}+C_{2}e^{-\omega_{0} i t}</math></center>
| |
| | |
| Sabemos de los números complejos que $e^{\omega_{0} i t}= \cos(t)+i \sin(t)$ y $e^{-\omega_{0} i t}= \cos(t)-i \sin(t)$, y las sustituimos en la solucion general.
| |
| | |
| <center><math>\psi(t)=C_{1}[\cos(t)+i \sin(t)]+C_{2}[\cos(t)-i \sin(t)]</math></center>
| |
| | |
| Reorganizamos términos
| |
| | |
| <center><math>\psi(t)=(C_{1}+C_{2})\cos(t)+i(C_{1}-C_{2})\sin(t)</math></center>
| |
| | |
| Definamos nuevas constantes como $A=C_{1}+C_{2}$ y $B=i(C_{1}-C_{2})$, y las reemplazamos en la solución.
| |
| | |
| <center><math>\psi(t)=A\cos(\omega_{0} t)+B\sin(\omega_{0} t)</math></center>
| |
| | |
| Hacemos que $A=D\cos(\phi)$ y $B=-D\sin(\phi)$
| |
| | |
| <center><math>\psi(t)=D\cos(\phi)\cos(\omega_{0} t) - D\sin(\phi)\sin(\omega_{0} t)</math></center>
| |
| | |
| Usamos la identidad trigonométrica: $\cos(\omega_{0} t+\phi)=\cos(\phi)\cos(\omega_{0} t) - \sin(\phi)\sin(\omega_{0} t)$
| |
| | |
| Y la solución general de la ecuación diferencial homogénea es:
| |
| | |
| <center><math>\psi(t)=D\cos(\omega_{0} t+\phi)</math></center>
| |
| | |
| Por ultimo nos que da evaluar las condiciones iniciales para responder los incisos '''(a)''' y '''(b)'''.
| |
| | |
| Las condiciones iniciales son $\psi(0)=CV_{1}$ y $\dot{\psi}(0)=0.$
| |
| | |
| <center><math>\psi(0)=D\cos(\phi)=CV_{1},</math></center>
| |
| <center><math>\dot{\psi}(0)=-D\sin(\phi)=0.</math></center>
| |
| | |
| La relacion $\dot{\psi}(0)=-D\sin(\phi)=0$ se satisface si, $\phi=0$ y por lo tanto $D=CV_{1}$
| |
| | |
| <center><math>\psi(t)=CV_{1}\cos(\omega_{0} t).</math></center>
| |